Timing my 1 cylinder stage 3

patrykziola

New Member
Nov 30, 2020
1
0
0
I have a problem with my cylinder 1.
Always only the number 1 corrects me, what can it be caused by?
My mod
Hybrid Turbo Perun Turbo(made in poland)
197295289_1182195975574732_5897873564621884458_n.jpg
197274489_625275511730855_4694310249405979581_n.jpg

WMI SNOW 1x250ml 1x375ml
B58TU puump
walbro 450 lpfp
dv+
Map 3.5 bar
Dinan Intake
Downpipe
Intercooler Do88
ChargePipe ALuminum

I have already replaced the coils, candles, injectors and still the same :/

https://www.spoolstreet.com/graphs/log-09-09-2021-07-04-36.11850/

241636293_695269648060287_3107166354271176439_n.jpg
241537993_549724106355560_6459498569305241236_n.jpg


My tuner tried different settings 1.7 bar 10 ignition (it was correction 7)
at 1.5 bar 13 ignition (Correction 6)
This always happens only on 1 cylinder.


I will add that before establishing WMI, the logs looked like this
---->https://www.spoolstreet.com/graphs/log-09-09-2021-07-11-09.11851/