Heres the log but maybe its better to explain it.
Car got new 19ts 2 inch inlets and outlets
Basically my afrs and stfts spike at 2000 rpm and 40 to 50 load. Lean spool is off/disabled the regular spool fuel tables set to 14.7 ive also turned down the max spool to 500 rpm and it still does it
Ive added fuel in that area in scalar all the way up to 1.45 and still it leans out just in that one area that area seems to be when the turbos start spooling happens during cruise aswell if i hold it at 2000 rpm 50 load
Any advice is appreciated
Here is another log that shows it more clearly
Are ny load actual and req too close ? Is there any easy way to seperate them ?
Last edited:
