MHD app enhancements thread

[aus335iguy]

@jyamona said

We will be actively seeking out suggestions for other improvements and features to add once the new apps release is behind us.

I’ll start

• Investigate DCT TCU Coms. Find RPM shift request routine and allow a flash time only offset to cater for different final drives
• On the fly Adjustable launch control for DCT cars(i dont know if the inbound enhancement is for DCT so stating it again)
• Set % DSC intervention actively in DTC and on modes.
• In the monitoring section - Set warning thresholds for all logged parameters and activate shift lights when breached.
• Set folder for log file so we can continuously log.
• Log other CAN data at OBD .... YES ALL OF IT ! Button presses switch position

 

[NoQuarter]

Read custom CAN messages on the bus.
0-5 scale message would be a good start

 

[aus335iguy]

What about write custom can messages ?

 

[1and1]

In the monitoring section - Set warning thresholds for all logged parameters and activate shift lights when breached.

In addition, allow setting the throttle position sensitivity for starting magic logs (Monitor (Auto Logging))

Last I read it kicks on around 75% TP, but I'd love to watch a bit deeper with my midrange....
of course I'm barely in the shallow end of this pool tho, so this is probably already available

 

[aus335iguy]

The shallow end is pretty crowded I wouldn’t worry... just be sure and socially distance and you’ll be fine

 

[F87Source]

@jyamona

Really great work on the MHD app!

I have a few suggestions if you will:

1) Allow for more data logging like others have said, such as datalogging diff temps on the m2/m3/m4 which do have a diff temp sensor. This would really help track guys battle these temps with coolers.

2) Maybe make a "laptimer pack" where camera, gps, and postition can be put inputted along with the datalogging so we can see how the car is doing on the track. Or maybe even collab with Harry's laptimer to allow for MHD data to be exported and synched.

3) Allow people who like me have already purchased the MHD monitor module to seek credit for the MHD super licence.

Thanks!

 

[b4llistic]

EDIT: Thanks your finding and reading my post. Unfortunately, Spoolstreet is no longer a neutral platform where we can have honest discussions on subjects and products freely.
For this reason I have deleted all information I posted on the forums.

 

[aus335iguy]

Bug:
Situation: Burbles only active in sport mode. Driving in D mode @ 130km/u while cruise control has a lower speed in memory.
Letting go of throttle and pressing CC memory button activates burbles.

What tha?

 

[NoGuru]

@jyamona said

I’ll start

• Investigate DCT TCU Coms. Find RPM shift request routine and allow a flash time only offset to cater for different final drives
• On the fly Adjustable launch control for DCT cars(i dont know if the inbound enhancement is for DCT so stating it again)
• Set % DSC intervention actively in DTC and on modes.
• In the monitoring section - Set warning thresholds for all logged parameters and activate shift lights when breached.
• Set folder for log file so we can continuously log.
• Log other CAN data at OBD .... YES ALL OF IT ! Button presses switch position

^ all of this, plus if we could control the cooling fan somehow for people who sit in staging lanes at the race track.

 

[aus335iguy]

^ all of this, plus if we could control the cooling fan somehow for people who sit in staging lanes at the race track.

That’s already in the pipeline !

 

[typedRew]

^ all of this, plus if we could control the cooling fan somehow for people who sit in staging lanes at the race track.

soon

 

[NoGuru]

soon

 

[martymil]

2 step rpm adjustable launch control

 

[Jake@MHD]

2 step rpm adjustable launch control

Already in the new app (for 6MT, DCT will follow). Combined with 2048 delete it will give you a standing RPM w/ throttle open. Timing retard and a configurable separate load target will be added as part of the antilag code.

 

[martymil]

Thats awesome

 

[martymil]

injector control ?

The last puzzle piece

 

[NoGuru]

injector control ?

The last puzzle piece

Oh yeah, please!

 

[martymil]

Get rid of the rear o2's

Make the rear o2 inputs assignable for other sensors

 

[namsu2430]

Is an inlets map still on the cards or has that been scrapped?

 

[azshantris]

Probably a longshot, but perhaps some way to recognize the m3 gts flash and set burble option based on shiftlogic setting?

Also, N55 E series here. N55 E series doesn't seem to be as popular of a platform lol, especially with the dct.
But I'll be happy with whatever I can get.

Curious about interfacing the 2-step launch control with stock dct/gts launch. Maybe a private custom option if not standard app option?

Thanks for all the great work and dedication!