Hello everyone.
I'm loosing 3psi of my target boost by the end iof the pull. My tune us set for 20psi tapering to 15-16psi but I'm ending with 13psi at 75% WGSC
Full bolt on with no wast gate rattle and new vacuum lines. Awaiting a smoke tester next week sometime.
Here is a log ror reference any ideas please let me know. I'm thinking solenoids as they are original 136k miles.
NO 30FF CODES
I'm loosing 3psi of my target boost by the end iof the pull. My tune us set for 20psi tapering to 15-16psi but I'm ending with 13psi at 75% WGSC
Full bolt on with no wast gate rattle and new vacuum lines. Awaiting a smoke tester next week sometime.
Here is a log ror reference any ideas please let me know. I'm thinking solenoids as they are original 136k miles.
NO 30FF CODES
Last edited:
