Brake cooling on the e89, without braking the bank.

[Armando1969]

I wanted to find out if I could integrate brake cooling in my E89 without it costing to much and looking obnoxious.
I bought a set for the e90 and it fits pretty good and most people won't even know its there.

 

[Armando1969]

This is were the Brake cooling ducts are located, i replaced the original plastic mesh with black stainless mesh for all openings in the front bumper.

 

[Armando1969]

First picture is a close up of the brake-ducts.
The rest are of the routing of the hoses, its tight but you can make it fit.

 

[KClemente]

Looks good! Where did you get those plates from?

 

[Armando1969]

From this site, but this is in Germany. https://www.teamschirmerparts.com/de/products/brake-cooling-single-duct-pipe
I fond some options in the UK and the US, for you. You can use the parts for the BMW e90, the front is almost the same as the e89.
UK. https://bcmotorparts.co.uk/shop/ols/products/bmw-e9x-brake-duct-kit-e90-e91-e92-m3
USA. https://socalsportscar.storesecured...tmctr=(not provided)&__utmv=-&__utmk=95430428